Bostik FP360 Putty Cord
FIRE RETARDANT PUTTY FOR DIFFICULT SERVICE PENETRATIONS
Bostik FP360 Putty Cord is a silicon based fire rated putty, hand workable, re-usable and re-serviceable due to its nonsetting properties. Bostik FP 360 Putty Cord contains a low pressure intumescent for optimal fire protection. LIMITATIONS - Where Bostik FP360 Putty Cord is to be installed against surfaces that cannot tolerate direct contact; appropriate surface preparation should be made (contact Bostik for guidance in these cases). - For paints sensitive to sealing compounds, priming with a PVA primer is recommended. - As BostikFP 360 Putty Cord is silicon based, in cases where corrosion protection is a problem; some metals may require a barrier between the putty and the metal surface prior to this installation. Available on request: - Material safety data sheet - Installation instructions FP360 Putty Cord - ETA 19/0388
Benefits
- CE-marked
- Fire classifications up to 120 minutes
- No emissions, environmental and user friendly
- Very easy to install
- Fire sealing around services with zero or minimal annular gaps (max. 10mm)
- CE marked to ETAG 026-2
- Fire resistance up to 120 minutes for both integrity and insulation
- Fire sealing without any minimum annular width around services
- Gives service penetrations a high fire resistance in dry lining partitions and masonry or concrete walls and floors
- Stops penetration of both cold and hot smoke
- Self-adhesive and very easy to apply without tools
- Unaffected by moisture: can be used in wet rooms
- Never hardens and ensures a tight fit
- Can be reshaped in other sizes if necessary
- Environment- and user friendly, contains no solvents or VOC's
Areas of application
Bostik FP360 Putty Cord is designed to be easily fitted around service penetrations where the gap around the services is very small, or there is no gap at all so a conventional fire rated sealant is impossible or difficult to fit due to the required depth and backing material. The putty cords are fitted covering the gap around the services and does not need to fill the gap to the required dept. Bostik FP360 Putty Cord will reinstate the fire rating of the partition and prevent the passage of smoke and flames in a fire, whilst also limiting sound and air movement around the service.
For cables, steel pipes, copper pipes and alupex pipes.
Characteristics
Shelf life
Shelf life is unlimited when stored in temperatures between +5 and +30°C
Colours
| Article number | EAN barcode | Packaging | Content | Diameter | |
|---|---|---|---|---|---|
| 30615327 | - | Cord | - | 15 mm |
Product information such as SKU, ordering and related product information for each product may vary by country. Data displayed at the International website is based on Benelux data.
Ask a question
Do you have a question about Bostik FP360 Putty Cord? We would like to help.
* Required fields