Suitability and pre-treatment of surfaces
For an optimal functioning of a sealant joint it is of essential concern that the sealant will make a good bonding on the surface it is applicated to. Indeed if the bonding fails, the function of sealing partly fails. The strength of bonding between sealant and surface depends to: 1 Strength of surface. 2 Suitability of surface. 3 Pre-treatment of surface. 4 Situation of surface during application. 5 Tolerance of surface with the sealant applied. 6 Application of bonding primer. Furthermore, it is of course important that the sealant is applied in the correct manner.
Download the complete technical bulletin
Related articles
-
Applications
Facade panel bonding
The use of HPL-facade panels has strongly increased against the classical facade panelling which was normally made of plywood. The choice for these new building materials is usually based on the fact they do virtually need no maintenance and give a nice …
Read more -
Applications
Finishing of sealant joints
The following points are of importance for this: 1. Processing equipment 2. Modus of applying 3. Modus of finishing
Read more -
Applications
Installation of window- and doorframes with Polyurethane Foam
Window and doorframes are made of materials such as wood, aluminum, steel and UPVC. Traditional window and doorframes are installed by using frame anchors. This method is time consuming and requires craftsmanship. Therefore, more often now, window and do…
Read more