FP312 Fire Retardant Coating
FIRE RETARDANT ABLATIVE COATING
Sprayable ablative coating specially designed to enhance, seal and fire protect stone wool fibres. The coating dries to give a flexible white surface finish. Stone wool fibres coated with Bostik FP312 Fire Retardant Coating prevent the spread of fire and smoke through openings in fire rated walls and floors where openings are formed to allow the installation of multiple building services. The system will contribute maintaining the acoustic design performance. Bostik FP312 Fire Retardant Coating is based on a durable polymer system with inert fillers, non-halogenated fire retardants and a preservative to resist microbial attack. Bostik FP312 Fire Retardant Coating is designed to be applied via spraying directly onto mineral fibres. The coating dries to give a sound, flexible white surface finish. During installation of mineral fibres, the cured sealant coating reduces de-lamination and increases surface stability for adhesive and fixing sealant application. LIMITATIONS - As Bostik FP312 Fire Retardant Coating is water based, in cases where corrosion protection is a problem; some metals may require a barrier between the coating and the metal surface prior to installation. - Bostik FP312 Fire Retardant Coating in not intended for application on bituminous substrates or substrates that can extrude certain oils and plasticizers or solvents. - The coating is not recommended for use in submerged joints or areas exposed to high abrasion. Available on request: - Material safety data sheet - ETA 19/0393 & ETA 19/0394
Benefits
- CE-marked
- Easy to apply - spray grade
- Up to 4-hour fire resistance
- High sound insulation
- Certified to the latest European standard EN 1366-3 & 4
- CE Marked to ETAG 026-2&3
- Fire resistance up to 4 hour
- Permanently flexible - will accommodate movements during fire and smaller movements in the construction it has been fitted within
- Easy and very quick to apply
- The coating applied on mineral fibres is classified for all types of constructions with or without building service penetrations
- May be used in unlimited lengths in walls with heights up to 1200 mm and in floors with widths up to 120 mm
- May be installed in gypsum walls without framing around the opening
- Easy to clean
- Once fully cured, resistant of water and frost
- Complies with requirements of M1 Protocol
Areas of application
The ablative property of Bostik FP312 Fire Retardant Coating resists flame spread and protects the mineral fibresagainst fire penetration by significantly reducing the
permeability of the mineral fibre core and prevents the passage of hot gases, thus reducing the temperature rise on the unexposed side and reducing heat conduction through the building services. Mineral fibres coated with Bostik FP312 Fire Retardant Coating are designed to prevent the spread of fire and smoke through openings in fire rated walls and floors, also where openings are formed to allow the installation of multiple building services. The system will also maintain the acoustic design performance.
Suitable for most surfaces, included concrete, masonry, steel, gypsum, glass, plastics and most non-porous surfaces. Bostik FP312 Fire Retardant Coating can be applied in combination with e.g. Bostik FP310 Intumescent Acoustic Acrylic, Bostik FP320 Fire Batt and Bostik FP340 Pipe Wrap.
Characteristics
Shelf life
In unopened original packaging between +5°C and +25°C, shelf life is up to 12 months from production date, stored in a dry place.
Colours
| Article number | EAN barcode | Packaging | Content | |
|---|---|---|---|---|
| - | - | Plastic pail | 8 ltr |
Product information such as SKU, ordering and related product information for each product may vary by country. Data displayed at the International website is based on Benelux data.
Ask a question
Do you have a question about FP312 Fire Retardant Coating? We would like to help.
* Required fields