Fungi resistance of sealants
Where products are used in wet areas like kitchens, bathrooms, swimming pools, abattoirs, cooling rooms, storage - and production rooms for food, fungal growth can occur. As a result of temperature, humidity, soap residue and traces of fungi in the air fungi can start growing on wet surfaces and is difficult to remove. This can happen on sealant joints. Fungi can develop at a humidity of 60% and grow even faster at higher humidity.
Download the complete technical bulletin
Related articles
-
FAQ
Paint cracking in acrylic paints
Although in general acrylic sealants can be painted very well both with solvent based paints as well as water based paints (for instance acrylic latex) it is possible that the paint film on the acrylic joint can crack.
Read more -
FAQ
Influence of temperature in storage and/or transport
In the technical documentation for of all Den Braven’s products the minimum shelf life after production is given as between +5°C and +25°C. When products are stored in higher temperatures this will shorten their shelf life. A maximum temperature of +45°…
Read more -
FAQ
Chemical resistance silicones
With regards to the effects of solvents and industrial chemicals on silicone rubber, the following data has been complied: Silicones are chemically inert and are attacked by very few common materials. Among them are concentrated sulphuric acid, hydrof…
Read more